
VERA 18
Hi-Fidelity for the Cinema
Ultra low distortion, high output subwoofer
The VERA 18 brings the standards of high-end Hi-Fi into the world of cinema, delivering low frequencies with a level of accuracy and musicality rarely found in theater sound. Purpose-built for high-end cinema installations, VERA 18 reproduces bass not as an effect, but as an essential layer of truth in the soundtrack.
At its core is Deus Audio’s proprietary MASS Drive™ motor system, a precision-engineered topology that maintains linearity and control even under extreme demands. This innovation ensures that every impact, note, and wave of low-frequency energy is reproduced with accuracy, not exaggeration.
Every component has been engineered to eliminate distortion and preserve detail, so even at reference levels, the bass remains controlled, articulate, and deeply engaging. Designed for behind-the-screen integration, scalable in arrays, and robust enough for studio and club environments, the VERA 18 sets a new standard for high-end cinematic low-frequency performance.
Application
High end cinema, production studio, premier dance club, screening room
Recommended Configuration
Two or more per space (ideally 4-16 depending on target max SPL and headroom), distributed to counteract room modes, behind the screen, stacked, etc...
Details
Hi-Fi grade performance, optimized for the cinema environment
Proprietary MASS Drive™ overhung linear BL motor system for unmatched linearity, Ultra-low distortion, control, and accuracy
Shallow depth (<12”) enclosure for behind-the-screen placement
Fully Klippel-validated for verified precision
4-conductor Neutrik SpeakOn connection + XLR thermal data cable
Amplifier: 2.5kW Hypex Ncore Class D with integrated DSP (real-time limiters, coil monitoring, adjustable LPF, gain, and 0°/180° phase)
Optional AES67 / Dante network input
120V, 20A dedicated circuit required
Specifications
Performance
Specification | Details | Notes |
---|---|---|
Impedance (per coil) | 3.40 ohm | DCR |
Coil Configuration | Single voice coil | |
Sensitivity | 95.5 dB | 2.83v/1m, 2π anechoic |
Max SPL (Peak) | 136.9 dB | 1m, 2π, anechoic |
Max SPL (Continuous) | 133.9 dB | 1m, 2π, anechoic |
Frequency Response (-3dB) | 30.0Hz – 230Hz | No DSP |
Frequency Response (-3dB) | 24.0Hz – 230Hz | With Linkwitz Transform |
Low Frequency Extension (-3dB) | 24.00Hz | With Linkwitz Transform |
Low Frequency Extension (-6dB) | 18.00Hz | With Linkwitz Transform |
Low Frequency Extension (-10dB) | 10.00Hz | With Linkwitz Transform |
Cone Breakup Frequency | 409Hz | |
Xmax | 29 mm / 1.14 in | One way, 82% BL |
Group Delay at f3 | 12.5 ms | With Linkwitz Transform |
System Qtc | 0.6 | With Linkwitz Transform |
Enclosure Alignment | Sealed | |
Low Frequency Rolloff | 12dB/oct |
CTA 2010 data (preliminary)
Frequency | Amp Voltage (RMS) | 1m Peak | 2m Peak | 2m RMS | THD |
---|---|---|---|---|---|
20Hz | 140v | 123.8 dB | 117.8 dB | 114.8 dB | 19.50% |
25Hz | 140v | 128.0 dB | 122.0 dB | 119.0 dB | 9.20% |
31.5Hz | 140v | 131.4 dB | 125.4 dB | 122.4 dB | 7.84% |
40Hz | 140v | 134.6 dB | 128.6 dB | 125.6 dB | 8.23% |
50Hz | 140v | 136.5 dB | 130.5 dB | 127.5 dB | 6.14% |
63Hz | 140v | 136.8 dB | 130.8 dB | 127.8 dB | 4.69% |
80Hz | 140v | 136.9 dB | 130.9 dB | 127.9 dB | 2.70% |
100Hz | 140v | 136.6 dB | 130.6 dB | 127.6 dB | 2.11% |
125Hz | 140v | 135.8 dB | 129.8 dB | 126.8 dB | 1.83% |
160Hz | 140v | 133.4 dB | 127.4 dB | 124.4 dB | 0.72% |
200Hz | 140v | 128.6 dB | 122.6 dB | 119.6 dB | 0.57% |
Design
I/O | Neutrik SpeakOn NL4 for audio, XLR for thermal data |
---|---|
Cables (Included) | 50' 4-conductor 12ga with dual Neutrik SpeakOn NL4 connectors (custom lengths available), 50' XLR for thermal data |
Customization Options | Custom cable lengths, custom brackets for stacking, coupling to structure, etc... |
Integrated Proprietary Technologies | Direct voice coil temperature measurement, overhung linear BL motor, CLD enclosure, coupled front and rear enclosure panels with special motor mount |
Patents | Pending |
Mounting | Sits on ground, integrated mounting points for custom brackets to connect speakers together in stacks or arrays, or to couple them to the structure |
Warranty (Default / With Registration) | 3 years / 5 years |
Dimensions (Metric) | 585 mm × 585 mm × 294 mm |
Dimensions (Imperial) | 23.0 in × 23.0 in × 11.57 in |
Shipping Dimensions (Crated, Imperial) | TBD |
Weight (Net, Assembled) | 87 lbs / 39.5 kg |
Weight (Gross, Shipping) | TBD |